Stay FLEXIBLE with LEANTECHNIK!

Discover our Three-Axis-Positioning-System (DAP)

Flexibility

Tight Operating Parameters

Low Maintenance

Highest Precision

Simple Installation

Efficiency Enhancement

See our Three-Axis-Positioning-System (DAP) in action!
Vimeo

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von Vimeo.
Mehr erfahren

Video laden

The Flexibility in your production needs a new name:

Three-Axis-Positioning-System (DAP)

Highest Flexibility

This system was specifically developed for the automotive industry due to industry demands. All renowned automotive manufacturers are under pressure to produce a variety of models, but in smaller production runs. To meet these industry demands, production must be flexible and efficient. One option is to produce several automobile models on a production line. Consequently, you need a “Positioning System” that has been designed for such applications. Our “Three Axis Positioning System” (DAP) has the flexibility to adapt to the various types of chassis and the flexibility to transport through the production line as parts are installed.

High Precision Positioning

Primary point of the DAP is our Gear Rack Drives, in that rotatory movement is transferred to linear movement. Our lifgo® Gear Rack Drives have precise roller bearings which provide exact positioning and are outstanding for high lifting speeds and the delivery of high transverse forces. There are four model variations in three sizes available and in addition the lifgo® 5.4 is for extreme weight situations.

Perfectly positioned for every automobile model.

Through the combination and synchronization of two or four lifgo® Drives powered by an electrical motor, the positioning system has the ability to move in different directions without extensive programming or assembly. Therefore, synchronized vertical and horizontal lift movements are achievable without difficulties. On the X-axis a lift from 500 mm (19.68 inches), the Y axis from 250 mm (9.84 inches) and on the Z-axis from 350 mm (13.78 inches) are possible. The repeatability lies between +/- 0.02 and +/- 0.01 mm. The lifting force is 3,500 N.

The positioning points operate independently from each other. They capture each ends of a chassis with support from take up points and are held with expanding grips. A controller jointly regulates each automobile model with essential spacing between the lifting points, lifts parts for the welding robot and manages other production processes at ideal working heights.

Flexible Engineering & Production floor planning

DAP (Three Axis Positioning) System offers the user a flexible production floorplan in which the positioning points of each chassis dimension can be automatically orientated. In this respect, LEANTECHNIK is a superior supplier in the production of multi-dimensional chassis.

For automobile assembly, we can offer our Lift & Lower Conveyor System with an additional Lifting System. It positions chassis for continuous operations with speed and precision.

Vimeo

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von Vimeo.
Mehr erfahren

Video laden

Benefit from our experienced engineering team.

They are prepared to assist with design and development recommendations of cutting-edge solutions that meet your demands and requirements.

Check out our leanSYSTEMS projects and find further information in our full catalogue.

Das sagen unsere Kunden über die Hubsäulen
“Ich liebe diese Hubsäulen! Für jeden Anwendungsfall ist etwas geboten”
Peter Müller

Marketing Manager, Muster AG

“Ich liebe diese Hubsäulen! Für jeden Anwendungsfall ist etwas geboten”
Peter Müller

Marketing Manager, Muster AG

“Ich liebe diese Hubsäulen! Für jeden Anwendungsfall ist etwas geboten”
Peter Müller

Marketing Manager, Muster AG

“Ich liebe diese Hubsäulen! Für jeden Anwendungsfall ist etwas geboten”
Peter Müller

Marketing Manager, Muster AG

Our sales team will be happy to advise you!

Our sales staff are at your disposal at any time for a non-binding consultation at your premises. To get in touch with your contact person, take a look at who is responsible in your postcode area.

While our product development and design takes place in Oberhausen, our sales staff is at your disposal throughout Germany.

Excellent customer care is part of our understanding of service.

 

You can find your suitable contact person here:

 

 

Head of Sales

Your sales contact

REINHARD JANZEN

E-Mail: janzen@leantechnik.com

Phone: +49 208 495 25 0

 

Sales Manager (international)

Inside Sales

ZIP-Area 0 | 1  &  6 | 7 | 8 | 9

DIRK GASTBERG

E-Mail: gastberg@leantechnik.com

Phone: +49 (0)208 495 25 19

ZIP-Area 2 | 3 | 4 | 5

SEBASTIAN KOCH

E-Mail: koch@leantechnik.com

Phone: +49 (0)208 495 25 31

Field Service

ZIP-Area 2 | 3

SÖREN STEFFENSEN

E-Mail: steffensen@leantechnik.com

Mobile: +49 151 160 425 84

ZIP-Area 4 | 5

MUHAMMED EREN CAYCI

E-Mail: cayci@leantechnik.com

Mobile: +49 173 232 50 56 

ZIP-Area 6 | 7

ARTUR ANSELM

E-Mail: anselm@leantechnik.com

Mobile: +49 171 841 28 18

ZIP-Area 8 | 9

STEFAN ASCHERL

E-Mail: ascherl@leantechnik.com

Mobile: +49 173 23 25 063

Key Account Management

Key Account Automotive

JULIAN BAUKNECHT

E-Mail: bauknecht@leantechnik.com

Telefon: +49 151 527 819 26

Key Account Automotive

FRIEDRICH KLAEGER

E-Mail: klaeger@leantechnik.com

Telefon: +49 151 647 528 89

leanSYSTEMS – Automation with a SYSTEM

The leanSYSTEMS product division refers to the development and design of partially and functionally ready plants & systems based on our lifgo® and lean SL® gearbox series.

Our motivation:

You provide the ideas – we provide the implementation!

At leanSYSTEMS, we provide you with the complete know-how and implementation power of our design engineers.  We accompany your project from the initial enquiry, through the complete design and planning of your system (incl. service life calculation), right up to implementation on your premises.

Discover:
Lifting Tables Lifting Columns Flexible Positioning Systems Pick & Place & more possibilities
adapted to your needs!

Benefit from the many years of experience of our team of engineers, who are on hand to advise you in the areas of development and design. leanSYSTEMS stands for customised solutions that are designed especially for you, so that they are precisely tailored to your needs.